Ready for a super easy and super cheap DIY that will take FOREVER?! haha! This is definitely one of those show stopper pieces for a party, but you will spend many nights tying lots and lots of knots!

SUPPLIES:

• $1 plastic table cloths. I got mine from the Dollar Tree and Walmart.

• Cutting mat and rotary cutter with extra blades (you can use scissors, but wow it will take a lot longer)

• *Plastic* Poultry Netting

• Zip ties

• Command Hooks 5lbs

• Optional : something to hang the backdrop on until you’re ready to install it. I used an old backdrop stand, but I would assume you could work directly on the wall using Command Hooks.

DIRECTIONS

1. Decide how big you want your backdrop to be. I cut the poultry netting into large pieces and fastened them together with zip ties. I also zip-tied the poultry netting to an old backdrop stand.

2. Cut roughly 1-2” strips of plastic table cloths. No need to measure or unfold them. You can literally just use a rotary cutter and cut strips very quickly.

3. Unfold each individual strip until you have A LOT. I would recruit someone to help you.

4. Tie one strip at a time to the poultry netting by folding the strip in half and feeling the tail end through the loop. (example below)

5. Continue until you achieve the desired look you want.

6. Trim any pieces as necessary.

7. Use several 5lbs command hooks to install the backdrop to the wall.

8. TA-DA! Admire your work!

FAQ:

• How big is your backdrop? Mine is roughly 8x8ft

• How many tablecloths did you use? I didn’t count but I estimated that I used about 60.

• How long did this take? Roughly 10 hours for one person.

• Can I use scissors instead of a rotary cutter? Yes! It will just take a little longer.